Codonics EP-1000 Series Manual de usuario Pagina 29

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 60
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 28
EP
-1000
Instant Dry Imager User’s Manual
2-9
Setting Up the EP-1000
1. Make sure that your computer is turned off.
2. Connect the female end (no pins) of the cable to the EP-1000
parallel port.
3. Connect the 25-pin end of the cable to the computer’s parallel
port.
4. Connect the power cord.
5. Press the
Power
button to power on the EP-1000.
6. Press the
Online
button to set the EP-1000 to offline mode.
7. Press the
Interface
button so that the
Parallel
light flashes.
8. Press the
Online
button to set the EP-1000 to online mode.
The
Parallel
light comes on steady (stops flashing).
Connecting a Parallel Cable
8
To connect a
parallel
(Centronics)
cable
Power cord
connector
Parallel
port
Vista de pagina 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 59 60

Comentarios a estos manuales

Sin comentarios